Ethernet Shield for Arduino W5200


Ethernet Shield for Arduino W5200
Stock Number: 35260 mp
 Review Average:  
 Number of Reviews: 2
 View ReviewsReview this item
$5.95


This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.
This item is no longer available


SHARE
    
     Email this to a friend     

Detailed Description

View PDF Data Sheet
W5200


Ethernet Shield with Micro SD Slot for Arduino
Compact LAN Shield using the Wiznet W5200 chip providing IP stack and capable of both TCP & UDP.
HX1198 10/100BASE-T Port Controller
Shield supplies up to 8 simultanious TCP/UDP socket connections.
SPI Port for communication to Arduino or other micro controllers.
UART and I2C Ports (Grove)
Can be server or client.
Micro SD card slot for file storage. Supports FAT16/32 2GB Max
Note: the W5200 & SD card share the SPI bus, only one can be active. You must disable the one you are not using.
RJ jack mounted Green & Yellow Status LEDs
Power: 3.3/5VDC from microcontroller
Communicates using the SPI interface (Arduino Pins D4 & D10-13)
D4: Selects SD Card
D10: Selects W5200 TCP/IP Controller
Digital I/O: Feed through:same as controller
Analog Input: Feed Through: same as controller
Supports up to 8 TCP/UDP Sockets
Compatible with the Duemilanove (168/328), Uno and Mega (1280/2560)
Supported by Arduino Ethernet library.
Supported by Arduino SD library
Ethernet Shield V2.0 Library:
https://github.com/Seeed-Studio/Ethernet_Shield_W5200
L: 2-3/4" W: 2-1/8" HT: 1-1/16” O/A WT: .1


California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov



 Product ReviewsClick here to review this item
Avoid too Old
This works only with the EthernetV2 library, not with the current Ethernet library and examples. It will not be recognized with the standard Ethernet library. I could not get the NTP library to work with the EthernetV2 library. I bought an official Arduino Ethernet Shield W5500 and everything just worked immediately.
- Norman Dallura, VA
 
Used as a web server
I bought this product to use my Arduino as a web server. It does its job fine and I have had no problems.